Kyle Equipment Co., Inc.
Hydro-Frac
Hydro-Frac

Poly Pipe Reel

 

Hydro-Frac  

 

  The Poly Pipe Reel is a must for anyone who has to work with pumps set on poly pipe. The Plastic Pipe Reel is faster than most other pump pulling devices, weighs a lot less than similar steel pipe reels, and is the only sanitary way to pull a pump because it stores the pipe as it pulls it ridding the need to lay the pipe on the ground. 

Hydro-Frac

   

    The Poly-Pipe Reel comes in two standard sizes, 16" wide drum and 24" wide drum, the capacities of each are listed in the chart above. The reel can be powered by 12VDC, 110AC, 220AC or hydraulically driven. Regardless of the power source the Poly Pipe Reel has the ability to pull 1200 lbs. at a speed of 40-45 ft/min. 

     The Poly Pipe Reel weighs approximately 350 lbs. depending upon size and additional options, the reels drum and chain guard are constructed of a special poly-ethylene that is fused together creating a product that is as strong as steel without the need to worry about paint, rust or denting. The drum is mounted on a tubular steel frame.

      The overall dimensions of the Poly Pipe Reel are as as follows:

        16" Wide drum: 24" W x 48" D x 54" H

        24" Wide drum: 32" W x 48" D x 54" H

       For additional accessories and optional equipment Click Here.

       For the removable side reel click here.

 

16" Wide Drum

24" Wide Drum

 

 

Hydro-Frac
Kyle Equipment Co., Inc. P.O. Box 658, Sterling, Massachusetts 01564 Out of State: (800) 426-6377 In MA: (978) 422-8448
Hydro-FracŪ is a registered trademark of Kyle Equipment Co., Inc.
c. 2007 All Rights Reserved. Site designed by tamaradesigns.